ChilliSpot Logo


  Home Features Release Notes FAQ man chilli Forum Download  

man chilli

chilli - www.chillispot.org. A Wireless LAN Access Point Controller

 

SYNOPSIS

chilli --help

chilli --version

chilli

[ --fg ] [ --debug ] [ --conf file ] [ --pidfile file ] [ --statedir file ] [ --net net ] [ --dynip net ] [ --statip net ] [ --dns1 host ] [ --dns2 host ] [ --domain domain ] [ --ipup script ] [ --ipdown script ] [ --conup script ] [ --condown script ] [ --radiuslisten host ] [ --radiusserver1 host ] [ --radiusserver2 host ] [ --radiusauthport port ] [ --radiusacctport port ] [ --radiussecret secret ] [ --radiusnasid id ] [ --radiusnasip host ] [ --radiuscalled name ] [ --radiuslocationid id ] [ --radiuslocationname name ] [ --radiusnasporttype type ] [ --coaport port ] [ --coanoipcheck ] [ --proxylisten host ] [ --proxyport port ] [ --proxyclient host ] [ --proxysecret secret ] [ --confusername username ] [ --confpassword password ] [ --dhcpif dev ] [ --dhcpmac address ] [ --lease seconds ] [ --eapolenable ] [ --uamserver url ] [ --uamhomepage url ] [ --uamsecret secret ] [ --uamlisten host ] [ --uamport port ] [ --uamallowed domain ] [ --uamanydns ] [ --macauth ] [ --macallowed ] [ --macsuffix suffix ] [ --macpasswd password ]

 

DESCRIPTION

chilli is a Wireless LAN HotSpot Controller. It supports of two different access methods for a Wireless LAN HotSpot: Universal Access Method (UAM) as well as Wireless Protected Access (WPA)

chilli has three major interfaces: A downlink interface for accepting connections from clients, a radius interface for authenticating clients and an uplink network interface for forwarding traffic to other networks.

Authentication of clients is performed by an external radius server. For UAM the CHAP-Challenge and CHAP-Password as specified by RFC 2865 is used. For WPA the radius EAP-Message attribute as defined in RFC 2869 is used. The message attributes described in RFC 2548 are used for transferring encryption keys from the radius server to chilli. Furthermore the radius interface supports accounting.

The downlink interface accepts DHCP and ARP requests from clients. The client can be in two states: Unauthenticated and authenticated. In unauthenticated state web requests from the client are redirected to an authentication web server.

In a typical application unauthenticated clients will be forwarded to a web server and prompted for username and password. The web server forwards the user credentials to chilli by means of redirecting the web browser to chilli. A received authentication request is forwarded to a radius server. If authentication is successful the state of the client is changed to authenticated. This authentication method is known as Universal Access Method (UAM).

As an alternative to UAM the access points can be configured to authenticate the clients by using Wireless Protected Access (WPA). In this case authentication credentials are forwarded from the access point to chilli by using the radius protocol. The received radius request is proxied by chilli and forwarded to the radius server.

The uplink interface is implemented by using the TUN/TAP driver. When chilli is started a tun interface is established, and optionally an external configuration script is called.

Runtime errors are reported using the syslogd (8) facility.

 

OPTIONS

--help
Print help and exit.

--version
Print version and exit.

--fg
Run in foreground (default = off)

--debug
Run in debug mode (default = off)

--conf file
Read configuration file (default = /etc/chilli.conf) where each line corresponds to one command line option, but with the leading '--' removed. Command line options override the options given in the configuration file.

--interval seconds
Re-read configuration file and do DNS lookups every interval seconds. This has the same effect as sending the HUP signal. If interval is 0 (zero) this feature is disabled.

file (default = /etc/chilli.conf) where each line corresponds to one command line option, but with the leading '--' removed. Command line options override the options given in the configuration file.

--pidfile file
Filename of process id file (default = /var/run/chilli.pid)

--statedir path
path to directory of nonvolatile data (default = /var/lib/chilli/)

--net net
Network address of the uplink interface (default = 192.168.182.0/24). The network address is set during initialisation when chilli establishes a tun device for the uplink interface. The network address is specified as either <address>/<netmask> (192.168.182.0/255.255.255.0) or <address>/<prefix> (192.168.182.0/24).

--dynip net
Dynamic IP address pool. Specifies a pool of dynamic IP addresses. If this option is omitted the network address specified by the net option is used for dynamic IP address allocation. See the net option for a description of the network address format.

--statip net
Static IP address pool. Specifies a pool of static IP addresses. With static address allocation the IP address of the client can be specified by the radius server. Static address allocation can be used for both MAC authentication and Wireless Protected Access.

--dns1 host
DNS Server 1. It is used to inform the client about the DNS address to use for host name resolution. If this option is not given the system primary DNS is used.

--dns2 host
DNS Server 2. It is used to inform the client about the DNS address to use for host name resolution. If this option is not given the system secondary DNS is used.

--domain domain
Domain name. It is used to inform the client about the domain name to use for DNS lookups.

--ipup script
Script executed after the tun network interface has been brought up. Executed with the following parameters: <devicename> <ip address> <mask>

--ipdown script
Script executed after the tun network interface has been taken down. Executed with the following parameters: <devicename> <ip address> <mask>

--conup script
Script executed after a user has been authenticated. Executed with the following parameters: <devicename> <ip address> <mask> <user ip address> <user mac address> <filter ID>

--condown script
Script executed after a user has logged off. Executed with the following parameters: <devicename> <ip address> <mask> <user ip address> <user mac address> <filter ID>

--radiuslisten host
Local interface IP address to use for the radius interface. This option also determines the value for the NAS-IP-Address radius attribute. If radiuslisten is omitted then the NAS-IP-Address attribute will be set to "0.0.0.0" and the source IP address of the radius requests will be determined by the operating system routing tables.

--radiusserver1 host
The IP address of radius server 1 (default=rad01.hotradius.com).

--radiusserver2 host
The IP address of radius server 2 (default=rad02.hotradius.com).

--radiusauthport port
The UDP port number to use for radius authentication requests (default=1812).

--radiusacctport port
The UDP port number to use for radius accounting requests (default=1813).

--radiussecret secret
Radius shared secret for both servers (default=testing123). This secret should be changed in order not to compromise security.

--radiusnasid id
Network access server identifier (default=nas01).

--radiusnasip host
IP address to report in NAS-IP-Address attribute. Defaults to the IP address specified by the radiuslisten option.

--radiuscalled name
Name to report in Called-Station-ID attribute. Defaults to mac address of wireless interface which can be specified by the dhcpmac option.

--radiuslocationid id
WISPr Location ID. Should be in the format: isocc=<ISO_Country_Code>, cc=<E.164_Country_Code>,ac=<E.164_Area_Code>,network=<ssid/ZONE>. This parameter is further described in the document: Wi-Fi Alliance - Wireless ISP Roaming - Best Current Practices v1, Feb 2003.

--radiuslocationname name
WISPr Location Name. Should be in the format: <HOTSPOT_OPERATOR_NAME>,<LOCATION>. This parameter is further described in the document: Wi-Fi Alliance - Wireless ISP Roaming - Best Current Practices v1, Feb 2003.

--radiusnasporttype type
Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11).

--coaport port
UDP port to listen to for accepting radius disconnect requests.

--coanoipcheck
If this option is given no check is performed on the source IP address of radius disconnect requests. Otherwise it is checked that radius disconnect requests originate from radiusserver1 or radiusserver2.

--proxylisten host
Local interface IP address to use for accepting radius requests.

--proxyport port
UDP Port to listen to for accepting radius requests.

--proxyclient host
IP address from which radius requests are accepted. If omitted the server will not accept radius requests.

--proxysecret secret
Radius shared secret for clients. If not specified it defaults to radiussecret.

--confusername username
If confusername is specified together with confpassword chillispot will at regular intervals specified by the interval option query the radius server for configuration information. The reply from the radius server must have the Service-Type attribute set to ChilliSpot-Authorize-Only in order to have any effect. Currently ChilliSpot-UAM-Allowed, ChilliSpot-MAC-Allowed and ChilliSpot-Interval is supported. These attributes override the uamallowed , macallowed and interval options respectively.

--confpassword password
See under the confusername option.

--dhcpif dev
Ethernet interface to listen to for the downlink interface. This option must be specified.

--dhcpmac address
MAC address to listen to. If not specified the MAC address of the interface will be used. The MAC address should be chosen so that it does not conflict with other addresses on the LAN. An address in the range 00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls within the IANA range of addresses and is not allocated for other purposes.

The --dhcpmac option can be used in conjunction with access filters in the access points, or with access points which supports packet forwarding to a specific MAC address. Thus it is possible at the MAC level to separate access point management traffic from user traffic for improved system security.

The --dhcpmac option will set the interface in promisc mode.

--lease seconds
Use a DHCP lease of seconds (default = 600).

--eapolenable
If this option is given IEEE 802.1x authentication is enabled. ChilliSpot will listen for EAP authentication requests on the interface specified by --dhcpif. EAP messages received on this interface are forwarded to the radius server.

--uamserver url
URL of web server to use for authenticating clients.

--uamhomepage url
URL of homepage to redirect unauthenticated users to. If not specified this defaults to uamserver.

--uamsecret secret
Shared secret between uamserver and chilli. This secret should be set in order not to compromise security.

--uamlisten host
IP address to listen to for authentication of clients. If an unauthenticated client tries to access the Internet she will be redirected to this address.

--uamport port
TCP port to bind to for authenticating clients (default = 3990). If an unauthenticated client tries to access the Internet she will be redirected to this port on the --uamlisten IP address.

--uamallowed domain
Comma separated list of domain names, IP addresses or network segments the client can access without first authenticating. Example:

--uamallowed http://www.chillispot.org,10.11.12.0/24

This option is useful for access to a credit card payment gateway, for access to community and other free information as well as for access to a company VPN server without first having to login to the HotSpot.

ChilliSpot resolves the domain names to a set of IP addresses during startup. Some big sites change the returned IP addresses for each lookup. This behaviour is not compatible with this option.

It is possible to specify the uamallowed option several times. This is useful if many domain names has to be specified.

--uamanydns
Allow any DNS server. Normally unauthenticated clients are only allowed to communicate with the DNS servers specified by the dns1 and dns2 options. If the uamanydns option is given ChilliSpot will allow the client to use all DNS servers. This is convenient for clients which are configured to use a fixed set of DNS servers. For security reasons this option should be combined with a destination NAT firewall rule which forwards all DNS requests to a given DNS server.

--macauth
If this option is given ChilliSpot will try to authenticate all users based on their mac address alone. The User-Name sent to the radius server will consist of the MAC address and an optional suffix which is specified by the macsuffix option. If the macauth option is specified the macallowed option is ignored.

--macallowed mac
List of MAC addresses for which MAC authentication will be performed. Example:

--macallowed 00-0A-5E-AC-BE-51,00-30-1B-3C-32-E9

The User-Name sent to the radius server will consist of the MAC address and an optional suffix which is specified by the macsuffix option. If the macauth option is specified the macallowed option is ignored.

It is possible to specify the macallowed option several times. This is useful if many mac addresses has to be specified.

--macsuffix suffix
Suffix to add to the MAC address in order to form the User-Name, which is sent to the radius server.

--macpasswd password
Password used when performing MAC authentication. (default = password)

 

FILES

/etc/chilli.conf
The configuration file for chilli.
/var/run/chilli.pid
Process ID file.

 

SIGNALS

Sending HUP to chilli will cause the configuration file to be reread and DNS lookups to be performed. The configuration options are not affected by sending HUP: [ --fg ] [ --conf file ] [ --pidfile file ] [ --statedir file ] [ --net net ] [ --dynip net ] [ --statip net ] [ --uamlisten host ] [ --uamport port ] [ --radiuslisten host ] [ --coaport port ] [ --coanoipcheck ] [ --proxylisten host ] [ --proxyport port ] [ --proxyclient host ] [ --proxysecret secret ] [ --dhcpif dev ] [ --dhcpmac address ] [ --lease seconds ] [ --eapolenable ]

The above configuration options can only be changed by restarting the daemon.

 

SEE ALSO

syslogd(8)

 

NOTES

Please see the ChilliSpot project homepage at www.chillispot.org for further documentation and community support.

Besides the long options documented in this man page chilli also accepts a number of short options with the same functionality. Use chilli --help for a full list of all the available options.

The TUN/TAP driver is required for proper operation of chilli. For linux kernels later than 2.4.7 the TUN/TAP driver is included in the kernel, but typically needs to be loaded manually with modprobe tun. For automatic loading the line alias char-major-10-200 tun can be added to /etc/modules.conf. For other platforms see http://vtun.sourceforge.net/tun/ for information on how to install and configure the tun driver.

 

COPYRIGHT

Copyright (C) 2002, 2003, 2004 by Mondru AB.